In response to Steve25s manufacturing comment: Let's say that a piston mfg. wanted to satisfy a market that needed several pin heights to let a customer adjust the piston to head clearance. The mfg. decides that four .010" increments of pin height would be a good idea. That means the mfg. would have to quadruple his piston inventory in every bore size and every C/R that he has available. There would be a lot of dead inventory in order to satisfy the guy who wants a .020" over piston with a .030" shorter pin height.
Personally, I have my machine shop cut the block to 10.230" then order the pistons with the pin height appropriate for the rod length and stroke I am using.
__________________
GOOD IDEAS ARE OFTEN FOUND ABANDONED IN THE DUST OF PROCRASTINATION
Last edited by KEN CROCIE; 05-10-2026 at 06:58 PM.
Reason: missing word (four)
|