View Single Post
  #2  
Old 05-11-2026, 10:17 AM
zippy's Avatar
zippy zippy is offline
Chief Ponti-yacker
 
Join Date: Feb 2003
Location: BC Canada
Posts: 786
Default

Quote:
Originally Posted by Squidward View Post
Respectfully, I don't buy that. More flow is always better heat transfer, whether it's air flow or coolant flow.
It's true. DeltaT time constant. Many years ago I tested that with my TA. And many others have too. Easy test. Take out thermostat completely. Max flow ytour cooling sys will get that way. Yup, take forever to warm up. And in town, slow stop and go driving, sure prob run cooler, as flow is cooler with lower RPM and engine power/throttle level

Now go on highway, go for a long hard rip. and keep in her for a while
Logic would suggest that then we have
More airflow due to speed
More coolant flow due to much higher RPM

But you will start having climbing temps. They will start creeping up and up and up.
You slow down and the temps go up even more before they start to come down

Why? The coolant was going so fast through the radiator that it had no time to remove enough of it's retained heat. Engine to coolant DeltaT is greater than the coolant to air DeltaT
Meaning, needs more time in rad to remove the heat than it does in block to pick up heat.

Scenario above, Put T stat back in and engine is stable at same high rpm load. Verifying flow speed matters

__________________
Dan Pesonen




"If it ain't broke, modify somethin till it is"