Rod Oil Clearances
Building a short block for a customer and getting some rod oil clearances up to 0.0030". I know that is high and not desirable, but I want to hear from people who have run those clearances on the street. I just want to know if this thing will live. I have gotten rod bearings coated from Calico before to adjust oil clearances, but I'm trying to avoid this since it's a budget build.
__________________
1967 Firechicken, 499", Edl heads, 262/ [email protected]" duration and 0.627"/0.643 lift SR cam, 3.90 gear, 28" tire, 3550#. [email protected] mph with a 1.45 60'. Still WAY under the rollbar rule.
|