Quote:
Originally Posted by SRGN
Check your grounds first. Power for brake lights goes through the turn signal switch, make sure you have power going to the turn signal switch. Post the part number for the harness you used, and I'll try to look up the diagram and give you some direction.
|
I used p/n 10401 I don't know if the auto meters I have in there are dimmable guy at painless was kinda useless he said do I continue check on the flasher relay and that's about it he also said do a separate ground and all about it. I can move the wiring for my gauges and make the gauges read differently. What could be causing that?