Thread: 1,800 RPM
View Single Post
  #26  
Old 07-18-2026, 06:40 AM
steve25's Avatar
steve25 steve25 is offline
Ultimate Warrior
 
Join Date: May 2008
Location: Westchester NY
Posts: 17,520
Default

Take advantage of doing this experiment if you still have the clutch removed.

Take one of the clutch mounting bolts ( or a long enough different bolt ) and stack two big washers under when you bolt it to the flywheel.

Start the motor and hopefully one of 3 things will then take place .

1) the vibration will be less or gone.

2) there will be no change .

3) the vibration will be worse.
If the vibration is worse the move the bolt washer combo across to the other side of the flywheel as best as possible to be 180 degrees out .

Try this in all six clutch mounting bolts holes or until you hopefully get some kind of result either way.

__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!

1) 1940s 100% silver 4 cup tea server set.

Two dry rotted 14 x 10 Micky Thompson slicks.

1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.

Education is what your left with once you forget things!
The Following User Says Thank You to steve25 For This Useful Post: