You got it correct. The Comp Cam rockers are designed differently than most other Pontiac rockers.
I recently built a motor, and had both Crower and CompCam (1.65) rockers handy. Iron heads, but HR cam/lifters. Crower rockers needed an 8.800" pushrod, Comp rockers needed 9.150".
FWIW, I think Butler is a GREAT source for parts, but not nearly as great for advice on street-oriented builds.
__________________
'73 T/A (clone). Low budget stock headed 8.3:1 455, 222/242 116lsa .443/.435 cam. FAST Sportsman EFI, 315rwhp/385rwtq on 87 octane. 13.12 @103.2, 1.91 60'.
'67 Firebird [sold], ; 11.27 @ 119.61, 7.167 @ 96.07, with UD 280/280 (108LSA/ 109 ICL)solid cam. [1.537, 7.233 @93.61, 11.46 @ 115.4 w/ old UD 288/296 108 hydraulic cam] Feb '05 HPP, home-ported "16" D-ports, dished pistons (pump gas only), 3.42 gears, 275/60 DR's, 750DP, T2, full exhaust
My webpage http://lnlpd.com/home
|