View Single Post
  #17  
Old 08-01-2020, 01:12 PM
1968GTO421's Avatar
1968GTO421 1968GTO421 is offline
Ultimate Warrior
 
Join Date: May 2014
Location: Travelers Rest, SC
Posts: 1,285
Default

Quote:
Originally Posted by chiphead View Post
Agree on any phone advise. Trust but verify. The pushrod pocket on those comp lifters looks higher up on the rocker body, like it would want a longer pushrod than say a HS or a Crower Enduro rocker.

When I checked the length on my setup, it wanted 8.850" pushrods IIRC.
H-J lifters, Voodoo HR cam, iron heads, long valves at 1.8 IH, Crower enduro rockers. I used the Straub technique.
Thanks, an interesting way to check valve geometry, seems more accurate than others.

https://www.youtube.com/watch?v=o5is9BsH5OU

(Jeremy treed me on the video)

__________________


"No replacement for displacement!"

GTOAA--https://www.gtoaa.org/