View Single Post
  #4  
Old 10-12-2021, 07:18 PM
JLMounce JLMounce is offline
Ultimate Warrior
 
Join Date: Sep 2005
Location: Greeley, Colorado
Posts: 3,679
Send a message via AIM to JLMounce
Default

Many Moog parts these days are “assembled” in the USA but the actual parts are off shore. India, China, Taiwan.

ProForged parts at least as of around 2012-2015 were produced in Taiwan.

Without finding some NOS parts or some real specialty builder type your made in USA requirement is going to be pretty hard to complete.

If it was me buying parts, I’d buy ProForged. Many of the larger name companies selling steering rebuilds are utilizing ProForged. Ridetech specifically rebrands the ProForged parts. Most ball joints coming with arms from places like DSE BMR etc are using ProForged ball joints.

Now if you wanted the ultimate what I would recommend is taking your factory hard parts and reassembling them using Howe ball joints. You’ll need access to a press and each joint is going to be between 75-90 bucks. But these are among the highest quality joints you can get these days.

__________________
-Jason
1969 Pontiac Firebird