[Sirrotica]

I built 4 tall stands (range is 24-48 inches) out of 2 sizes of schedule 40 pipe (1 1/2, and 2 inch) 4 steel 14 inch rims, then used 3 pieces of 5/8 inch rebar to go from the outside edge of the rim to the outside pipe for stabilization. I used 1/2 inch pins for the height adjustment with holes drilled every 2 inches. I've used these to hold up my dually when I converted it from steel leaf springs to 4 link air ride. Empty the truck is in the 6,000# range. I'm very confident that they'll hold double that weight because I over engineered them to hold up my dually.

No one made what I needed, so I made them myself. They could easily be scaled down to a shorter stand if need be, but I needed something taller than conventional stands. There is no car that would ever be unsafe on them