03-02-2021, 01:29 AM
|
|
Ultimate Warrior
|
|
Join Date: Nov 2002
Location: ABQ, USA
Posts: 5,023
|
|
I thought I had to pull the rocker trim to move the fenders - turns out I did not need to move them. The repop clips that come with the trims are too long and distort the trim. I removed them and trimmed off 1/16" off the top and clipped the edges for easier mounting as shown below, as well as shortening the screw heads for clearance - worked very well!
Distortion went 95% away when remounted.
I also buffed out the wheelwell trim also - noted with disgust the overspray from the previous painter who could not be arsed* to remove them.
*I was podding Nicholas Moran, aka "the Chieftain" describing the Centurion AFV so some of his Irish color is bleeding thru here
|