[scld1354]

Here is what I have for wires and colors on my 67 GP:

Driver side
- innermost bulb = one wire (brown)
- center bulb = two wires (yellow, brown) NOTE: this one actually has two yellow wires going into one filament and the brown wire going to the other filament.
- outermost bulb = two wires (yellow, brown)
The reverse light wire is taped inside the same harness and is a lighter green.

Pass side
- innermost bulb = one wire (brown)
- center bulb = two wires (green, brown) NOTE: this one actually has two green wires going into one filament and the brown wire going to the other filament
- outermost bulb = two wires (green, brown)
The reverse light wire is taped inside the same harness and is a lighter green.

Sent from my SM-A505U using Tapatalk