[grivera]

Here is the new stance - no drive time to settle suspension yet. Also, front shocks not bolted into bottom of control arms yet. I have the steering column out to paint it so won’t get to drive it for a bit. I like the stance and at top of wheel well I get 25” front, 25.5” in back. Not sure if front tires will run yet - I should be good though as they are only 235/60/15

For some reason the right coil spring has a clunk to it when bringing it down from lift. The BMR lower a-arms have a locator for spring which is what I used as opposed to the one in upper spring pocket or otherwise the spring would have been on top of the locating tag. Not sure if that’s why it clunks as it’s seated well inside the pocket - both sides look good in there.