Well my install went well. The best thing I believe I did was use a set of factory hangers for the muffler off a parts car. That set the muffler at the right height, I also used the factory tailpipe hangers,and the only real issue was I had was that to reloacate my flex brake line/splitter back about an inch and remount. I spent some time up front making sure the collectors would square up with the headers. Overall pretty easy install..only hangers really needed are at the rear all factory spots.
Sounds good quiet inside at 60 mph zero drone..sounds good at idle and full throttle.
__________________
466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2
373 gears 3200 Continental Convertor
best et 10.679/127.5/1.533 60ft
308 gears best et 10.76/125.64/1.5471
|