First you should just use a plain nut and some washers to adjust a intake and exh valve and confirm that at max lift of each that the rocker arm heel itself does not hit the valve cover.
This way if need be you can pick up thicker gaskets along with the needed length poly locks.
The other factor between stud length and poly lock length is that you want real close to 1/2” of thread engagement between the two!
You do not want the poly lock to dangle off of only 1/4”! Worth of threads.
__________________
I do stuff for reasons.
Last edited by 25stevem; 07-14-2022 at 06:48 PM.
|