Quote:
Originally Posted by Sun Tuned
Crower has em in stock.
|
These are what Sun Tuned referenced:
https://www.summitracing.com/parts/cro-86050s-16. Less than a quarter inch shorter, but enough to make a difference.
I can get large roller cam setups under the '67 and later chrome valve covers. It takes these polylocks, 1.75" stem length studs, Crower stainless Rockers, and 5/16" valve cover gaskets. You can skip the thicker gaskets on initial assembly and go with stock thickness, but will find out on about the 2nd tightening after about six months you will start getting some rocker to valve cover interference.