Quote:
Originally Posted by Formulajones
Hard to tell from pictures but assuming the door is where it needs to be, it looks like the fender could use some shims at the core support to raise the front of the fender slightly if you are looking to tighten that gap near the top. Or possibly the entire fender may need to be moved rearward. It's really a judgement call as to what you're looking for.
|
i was thinking the same thing , can i put shims at the front of the fender were it sits on the core support. the doors are good with the qtrs .the x dimension is bang on . i can not raise the core support any more . i will install the bumper and hood and see what happens
no need to take it to a body shop ,were is the fun in that ?