Quote:
Originally Posted by pfilean
For dist vacuum you will probably also need to feed vac to the heater also. That is part 25 and 60. Pictures attached from a couple of carbs (62 for P8 has hot idle comp. and a 64 for T8) as one picture is missing part 64 to the distributor. Other picture has it in place. I think it is available from pontiactripower. Looks like the small pipe to feed the heater has been abused from years on a shelf. The "T" off the carb base (63) can probably be made from parts store pieces. A little brass pipe and a "T". Although the fitting for the heater vacuum (60) may make that also unobtainable. I'll add a couple of pictures of that also.
Maybe Dick Boneske can help you with parts.
|
I now have everything except the vacuum can and the 3 way fitting #538962 by the front of the intake. You can see it all the way to the right in the pic.
John in FL had some original parts.
Thanks for the help.