OK, now the question is, what little used forum topic do we use for our discussions. I doubt the forum admin wants to add an "Experimental" section, but who knows.
HIS ... I've got a simple, working servo driver circuit made up with a linear pot to adjust position. I don't want to make it a "hard" choke ... I want a spring between the servo and the choke rod so it imitates the stock bi-metal coil and all carb hardware can remain untouched (with the exception of modified choke rod). All the servo would do is "imitate" the coil spring, fooling the carb into thinking the engine was warmer or colder than it actually is. I'd like to enclose in something very similar to the OEM choke stove .. problem will be isolating the servo from heat well enough.
__________________
I'm World's Best Hyperbolist !!
|