Quote:
Originally Posted by Stan Weiss
Thanks for posting the cam card.
Sure wish Pastry Chef (Mike) was not suspended. He would be able to post up the actual lobe curves for these lobes. This would give us a better understanding of what advancing the cam and moving all 4 cam events would do. While advancing the cam does not change how much overlap the cam has it does change how the overlap will work. They are some on PY who like to degree the cam where the intake lifter raise is 0.030" higher than the exhaust ATDC.
Stan
|
Interesting, it's all nee to me, I have never messed with cam timing other then to match the cam card and I have usually had them spot on eith the card with the dots lined up.