My current combo 2009
462 stock crank,stock rods,trw pistons bought rebuilt from previous owner
SD 290 cfm KRE 85cc heads
Dave's old faithful cam installed at 108
Harland Sharp 1.65 rollers
Torker 2 intake with 3/4 open wood spacer
Holley 950 hp
3/8 inch lines with a Mallory 140 pump
WFO shaker assembly
HEI with a MSD 6AL
Continental "Jim Hand" 10 inch convertor
TH 350 with manual valve body
3.42 posi
1 3/4 Hooker Super Comp Headers Pypes 3 inch X crossover, 2 1/2 ultraflos,2 1/2 tailpipes
Stock suspension with air shocks in rear
Car idles at 800 rpm runs on 89 octane
Ran 11.882 at 114.59 with a 1.703 60ft through the exhaust Sept.25/2009
|