View Single Post
  #9  
Old 01-27-2014, 09:12 AM
Larry Navarro's Avatar
Larry Navarro Larry Navarro is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Spring(Houston) Tx. USA
Posts: 6,369
Default

Lee, I have recommended and use the Hedman #28150, 1.75" x 3".
Use the composite header gaasket from Fel-pro 1423 (or maybe 1424) either one is for a D-port.
They have good ground clearance and fit well, even on a lowered car like mine.
Looking underneath and across the bottom of the chassis, the lower tubes hang just below the frame rails.

The Following User Says Thank You to Larry Navarro For This Useful Post: