Thanks for suggestions guys!
Good to hear that Hedman is now making a good product for these cars. I looked at a set back in the early 90's, and the flange openings weren't even shaped liked the Pontiac ports! But I recently bought some Hedmans for an LS-swap project, and they are gorgeous headers!
I've got an offer on an old set of Hookers - never used. Those will be a serious consideration.
Larry, thanks for sending Steve H. my way, he's a very nice guy and I enjoyed working with him. He has the 2.5" RARE's on his '79 400/4spd. S/E. Even though he only has about 8.3CR, we were able to get 314rwhp out of it! With the low CR and RARE's, I wasn't expecting it to go higher than maybe 280.
I'll discuss the options/costs with the owner, thanks again.
__________________
'73 T/A (clone). Low budget stock headed 8.3:1 455, 222/242 116lsa .443/.435 cam. FAST Sportsman EFI, 315rwhp/385rwtq on 87 octane. 13.12 @103.2, 1.91 60'.
'67 Firebird [sold], ; 11.27 @ 119.61, 7.167 @ 96.07, with UD 280/280 (108LSA/ 109 ICL)solid cam. [1.537, 7.233 @93.61, 11.46 @ 115.4 w/ old UD 288/296 108 hydraulic cam] Feb '05 HPP, home-ported "16" D-ports, dished pistons (pump gas only), 3.42 gears, 275/60 DR's, 750DP, T2, full exhaust
My webpage http://lnlpd.com/home
|