[alleyCat]

Originally Posted by Vetteman61

Thanks guys. Greg, when you say a little smear, are you referring to Permatex Ultra Black or to something else? Also, when you refer to some on the donuts gasket for the timing cover, do you mean actually on the donut itself, or just around the edges of where it sits?


Also, when torqueing down the manifold, do you tighten the timing cover part first all the way, or do you torque the manifold down a little bit, then then timing cover all the way, then finish the intake.... or in what order do you tighten those two things?

thanks,

Also wondering what order to torque timing cover and intake to seal timing cover donut properly