Ames sourced reman tilt column:
Heat stove and tube installed:
Also, I figured out the reverse lights. I used a switch setup from a '63 Vette, since they used a BW T-10 trans. I made a harness that plugged into the connector on top of the steering column, and ran it through the firewall down to the connector on the transmission mounted switch.
With the 4 tube headers, using the original backdrive linkage was not an option.
Here is a later 60's Vette with a Muncie, but this is extremely similar to the setup that is on my BW ST-10:
__________________
1976 LeMans B09 Freeway Enforcer, 455/M40 Smokey
1977 Trans Am, 400/M21 Black/Gold Bandit. 44K actual miles
2017 Sierra SLT 1500 Z71 4X4
2019 Canyon SLT Crew 4X4