My 2 row (1.25 inch tubes) cold case is actually no thicker, maybe even a little thinner than the 4 row Harrison I replaced. In any case, the radiator doesn't locate the shroud anyhow. The shroud bolts to the car so is fixed to the frame and that sets the relationship between the fan and the shroud. I have the stock AC pulleys and it doesn't look lie the clutch fan setup would allow for the fan to be moved closer to the water pump flange. I just find it curious that the alignment between the fan and shroud is "wrong" on what appears to be a totally stock setup. I don't think it's the wrong shroud.
|