Quote:
Originally Posted by er455
I don’t know how your going to fit a 5” downpipe in your project but if you do I would love to see some pics , I have a 3.5” and it’s tight . I have to change spark plugs by jacking car up and go thru the wheel well
|
I had a 5" downpipe on mine to the rear of the transmission then I necked it down to 4" on out to the bumper. I have no A/C box and built my own filter relocation adapter with the lines angled forward so no oil filter adapter in the stock spot. Had plenty of room and I changed plugs from the top just fine. Now I have a fender exit but probably will put the full exhaust back on. I just want to split the 5" into dual 3.5"s or two 4"s when I do instead of one 4". This is an old picture and the only one that I have I think. I'll post a picture of the adapter I made when later tonight.