View Single Post
  #7  
Old 04-21-2011, 02:37 PM
Captainofiron's Avatar
Captainofiron Captainofiron is offline
Chief Ponti-yacker
 
Join Date: Apr 2007
Location: Austin, TX
Posts: 648
Default

ok so I got under the car yesterday and took more measurements and refined my design.

I had made a few assumptions, and a few were good, and a few were bad.

So here is the revised model,

I will post up portions of the model so someone can hopefully turn my drawings/model into an actual system.









__________________
www.fquick.com/Captainofiron

68 Firebird 400, YC 400, Hbeam rods, ported 670 heads (2.11i, 1.77e valves), 1.65 RRs, Torker 2 intake, Nodular Crank, Eaton Limited Slip, Richmond 3.55 gears, M-20 M4
97 Trans Am WS6, LT1, M6, FLP LTs, Cutouts, Flowmaster catback, Jet Airfoil, K&N air filter, MSD Opti and Coil
14 Fiat 500e 83kW motor, 24kWh lithium ion battery, +2 sized summer tires
Reply With Quote