Dash installed finally, new heater control cables (EZ Slider ) then I placed the pass side kick panel in place bit of a beotch to install....that wa the side I had to fix the cable for the upper dash vent as it blew into a few pieces….I used a piece of vacuum line sliced one side of it slipped it over the cable and then tie strapped it to close up the slit works perfect….thought I had a pic but I don’t…
Next I'm gonna pull the carpet out that's been laying in there then lay down the low profile x mat
__________________
 1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's
Last edited by cnc; 01-29-2023 at 03:58 PM.
|