Quote:
Originally Posted by stobin
I already have a QA1 coil over set up with upper and lower Global West A-arms. I currently run 550 lb. springs. I also have a set of 450's that I will install to test out. The LS will drop enough weight to reduce my front to rear bias to 50/50.
|
One of the Pontiacs I have is a 74 GP. I want to lower this car a little. Currently I can measure 6" between the cross member and the ground. You seem to be up on this for your model. Do you know of a quality drop spindle I can get for this car? Or would you recommend lowering springs to do this job? I have been looking at the McGaughy's 7078 drop spindle but I know nothing about this company other than the spindles they make are made in the USA and of 4041 chromemoly forgings. I don't want to hijack your thread but it is tough finding this type of info on the 73-77 A/G bodys. I think your goals for your Grand Am are the same as mine for my Grand Prix. My 70 GTO is much easier to get suspension upgrade information for.
Thank you
Paul