Prefer to do it after glass bead cleaning. You then, have a clean surface for better adhesion. Then, I have the dichromate done.
Seldom is the repair invisible. I smooth the repaired area with JB Weld, sand it, mask it, and paint the repaired web .
I had a local paint shop mix a can of iridescent satin spray that was color-matched to the dichromated carb body.
Here are two pictures of repaired end carb webs and two of a center carb before sanding & painting.
__________________
BONESTOCK GOATS
'64 GTO Tripower Hardtop (Wife's Car)
'64 GTO Tripower Post Coupe (My Car)
'99 Bonneville SE Sedan
|