View Single Post
  #79  
Old 09-08-2021, 04:34 PM
Greg Reid's Avatar
Greg Reid Greg Reid is offline
Ultimate Warrior
 
Join Date: May 2003
Location: Palmetto, GA. USA
Posts: 16,167
Default

Got it set up.
This used to take quite a bit of time and effort to get a car up this high. I'm liking it. It's almost worth the buy-in just as a jack to raise it high enough to put jack stands under, but with the locks I would only do that if I needed it at a specific height that was between the two settings for the locks.
I also like it for working under the hood. For me it's much more comfortable to stand straight up and do many of the things on the top end. It will greatly increase the comfort of any wheel work also. With this I can do it sitting in a chair.
To give some idea of height, l'm 6'2" and the roof is eye level at it's peak. The lower edge of the rocker panel is 24" at about midpoint. This is with two rubber blocks in place.
I think it's going to be a back saver.

Sent from my moto g stylus (2021) using Tapatalk

__________________
Greg Reid
Palmetto, Georgia