Planning turbo engine build
I have some 32cc dish pistons in a 4.25 bore diameter that I want to use. I am planning on using these pistons. My thought is on what crank I would like to use. Should I use the offering from Molnar in a 4” stroke or should the 4.25” stroke. This is not some max effort engine, but should run good.
I have my 74cc combustion chamber aluminum Kre Dports for cylinder heads. With the 4” stroke I will get 454 cubic inches at about 9.04:1 compression. With the 4.25” stroke I will have 482 CI at about 9.54:1 compression. I have the turbo manifold already set up for a single turbo. I am thinking of using s S400 or an S480.
This is not a total budget build, but I do need to spend my money wisely to get it done.
__________________
67 Firebird 467 cubic inches 7.71 @ 92 in the 1/8 and 11.69 @ 115 in the 1/4.
|