View Single Post
  #9  
Old 05-01-2021, 01:38 PM
'ol Pinion head 'ol Pinion head is offline
Ultimate Warrior
 
Join Date: Apr 2000
Location: INJUN Territory, Red State Merica!
Posts: 9,581
Default

With the 12 bolt rear being original to a '70 GP, it should be a McKinnon built 12 bolt, the factory c-clip axles in the McKinnon built 12 bolts for '68-70 Buick & Olds usage & '70-72 Pontiac usage have a slightly larger diameter pilot where they go through the brake drum. A new pair of Moser 12 bolt axles for a '68-72 "Chevelle" or 70 1/2 Fbody will have a slightly smaller diameter pilot, but will work, or if concerned about the slight difference, one can run "Chevelle" style drums.

Someone was asking a month or so back about the pilot hole diameter of the different 9 1/2" rear drums, I'll pull some factory axles out of the racks & post the two measurements later this weekend.

__________________
Buzzards gotta eat... same as worms.