Cool project! The Accufab dominator throttle body works well. The adjustment screws for the throttle blade adjustment can have clearance issues though. I used a phenolic 1" spacer, which the manifold really can make good use of anyway, and it was easy to clearance the spots that needed it. It uses GM style tps, and stepper IAC valve. Hopefully others will share some recommendations for you as well. Remember they are generally lower profile, (than the dominator carbs) which helps with hood clearance and may allow a spacer where one wouldn't fit before.
__________________
'65 Tempest 467 3650# 11.30@120.31
|