[nytrainer]

Hi all. I’m puzzled. I just had my dash out because I changed the bezel with a re-chromed one. When I had the cluster out I checked the traces for the illumination and all worked fine. I put the dash back in and no dash lights.
I changed the headlight switch no difference.
Fuses all good.
Tail lights all work.
park and headlights work.
Rotating headlight knob no difference (interior lights on when rotated CCW)
Ground from cluster “straps” have continuity to body ground. In dash clock functions (so ground is good)
pulled out dash again to check illumination pin on trace plug. No voltage with headlight knob pulled out.
I assume 12v feed for the illumination circuit (gray wire) comes from HL switch?
Not sure what my next move is?
thanks