I prefer to take the time ( 4 to 5 minutes) to slowly fill my new filters to the very top, or as close as I can to get most of the air out.
Hydro systems are way different then oil that feeds the bearings.
Air in a hydro system and you just end up getting no extension because air can be compressed, air mixed in with oil going into the bearing gap where only pure oil should be can make for brief metal to metal contact and you don’t want that in the least!
Thank you but I will take my chances that there might be some some micro crap in my new oil.
besides what about the rest of the new oil that your going to add to motor once you have the new filter on, are we to pre-Filter or look at all that new oil first in a big one gallon glass jug to look for crap?
These YouTube guys many times just go out on a limb with a subject just to get it up there and make money!
I have never had problems in 55 years of doing my own oil changes with crap in new oil and I fully expect I never will!
__________________
I do stuff for reasons.
|