View Single Post
  #1  
Old 09-13-2021, 09:26 PM
scott70's Avatar
scott70 scott70 is offline
Ultimate Warrior
 
Join Date: May 2002
Location: maine
Posts: 2,220
Default Stupid decal question

I have two 70 gto trunk decals from I believe 2 different manufactures. The tops of the G,T and O are even with a straight edge. If you measure the G its 1 1/16" tall and so is the O. The T is only 1" tall. So the tops of the letters are even but the bottom of the T isnt because its 1/16" short. Both trunk decals I have are the same way but subtle differences look like 2 different manufacturers. Did pontiac do that from the factory or did these manufactures mess them up? Told you it was a stupid question.

__________________
72 lemans,455 e-head, UD 255/263 solid flat,3.73 gears,,,10" 4400 converter,, 6.68 at 101.8 mph,,1.44 60 ft.2007
(cam 271/278 roller)9"CC.4.11gear 6.41 at 106.32 mph 1.42 60 ft.(2009) SOLD,SOLD
1970 GTO 455 4 speed #matching,, 3.31 posi.Stock manifolds. # 64 heads.A factory mint tuquoise ,69' judge stripe car. 8.64 @ 87.3 mph on slippery street tires.Bad 2.25 60ft.Owned since 86'
The Following User Says Thank You to scott70 For This Useful Post: