@Racerboy >> "Block check Align Bore" and this was done after a hone Without a plate?>
Did you buy a UNDER-sized Timing chain?, if not, is yours tight?>
When a real "align bore" is done the crank moves UP in the block. NOTE: Your front timing cover SEAL and rear main seal DO NOT move UP WITH the crank.
I would Borrow or make a smoker for this engine when its built and on the engine stand to be SURE you have NO oil leaks at front and rear of crank....
__________________
"The Future Belongs to those who are STILL Willing to get their Hands Dirty" .. my Grandfather
|