yes thats the stuff, they sell a low luster clear too.
for a small part like that i just clean the crap out of it with warm water & dawn dish soap, not the "gentle on hands" stuff that has moisturizers in it. then wipe with rubbing alcohol. after clean scuff it with a scotchbrite pad. dont need to remove all the old paint if its still adhered ok & not flaking off.
if the vinyl isnt actually deteriorating it should be ready for 3 or 4 light coats per the instructions on the can or website if no can instructions. then follow with the clear if you want. clear the nozzle & you can use it for other parts that need touched up down the road.
|