Quote:
Originally Posted by 78w72
thanks for the tips, i found the side metal push pins can rotate somewhat to help them align better but a couple still dont fit right, i just left them out & the sides are mostly secure. but the side clips dont help with the top[ rail issue, the PUI panels dont have the tabs like the factory ones do that clip on to the window felt pads & that is what makes the top rail not be secured. on the later year 1 piece panels GM started using a metal strap in that area to secure to the felts, the plastic ones usually cracked after a couple removals over the years.
i just live with mine now since when the door is closed they are secure. i did notice very small metal tabs on the PUI panels but no indication of how to bend them to make them function anything like the GM panels. do you recall what if anything you did to make teh top rail fit secure like originals?
|
I just remember that after getting the metal clips on the upper door panel oriented up to the 12:00 position, it positioned the door panel lower and more firmly along the top of the inside of the door. I am installing these on Saturday (if my hardware arrives) so I will definitely post up a review of this particular run of PUI upper door panels.