Need wire connector advice
I've got a project that is going to require a lot of low voltage/amp connections (stepper motors in a small cnc project).
Max voltage about 24 vdc, max amps about 6.
I need connectors ranging from 2 poles to 6. I need the kind of connectors that you wire yourself .. soldering/crimping the wires on to the pins of the connectors. Weather proof is not a requirement.
I see AMP, Molex, JST, Dupont etc.
A big plus would be an option to panel mount female connectors ( think plugs in the exterior of an electrical enclosure).
Any advice appreciated.
__________________
I'm World's Best Hyperbolist !!
|