Yes the measurement is right at 1-1/2" so we are good there.
The frame mounts were pretty tight on the bolts as I remember. Fortunately the body is off the car so it is pretty easy to pull these on and off. I'm going to try some shims under the pass motor mt to block interface and see if that will move it over and see what the pass side looks like. I have see others have to grind that lower control arm mount to get some clearance.
The up/down is not the problem - it is side to side. I'll keep all posted on outcome in the case it helps someone else. I'm wondering how those Ames torq lock mounts might work if anyone has expereince with them?
|