Thread: voodoo 704
View Single Post
  #7  
Old 11-17-2022, 10:52 PM
Jay S's Avatar
Jay S Jay S is offline
Ultimate Warrior
 
Join Date: May 2018
Location: Nebraska City, Nebraska
Posts: 1,708
Default

I actually prefer the Bullets Steve mentioned over the voodoos, mostly because you can run 1.65 rockers on them with better results than the voodoo. The extra exhaust lift on the Voodoo’s does not seem to help on power. With Harlen Sharp 1.65s and the series Steve listed the valve lift is almost .570”, and have the same intensity as the voodoo from .006” tappet to .050”, with the same velocity off the seat. Example is the 704’s intake is 281* @ .006” and 233* at .050”. Bullet has them 280*@.006” and 232*@.050”, then 283*@.006” and 235*@.050”, with larger exhaust profile to match. I think the smallest one has 230* @.050” and the largest is in the mid 240s* at .050”, all with .3334” lobe lift. The Voodoo have slightly more dwell over the nose and carry some more assymetric’s further up into the profile.

Jegs is probably the best place to ORDER a Lunati Voodoo. Lunati is owned by the same investment group as compcams, and are all ground now at Compcams. Jegs does not charge for back ordered parts until the order gets filled, and has a lot of buying power with Comp. FWIW, the 704 has showed up on Ebay via Jegs, they have had some in stock over the last year, usually as cam and lifter kits.


Last edited by Jay S; 11-17-2022 at 11:04 PM.