[Steve C.]

As pointed out the Howards Cams lobe list includes the Harold Brookshire designs from when he was at Custom Camshaft Company in the mid/late 2000s. Howards Cams acquired Custom Camshaft Co. (CCC) from its parent company, Arrington Manufacturing.

Jay is correct these would be Harold's last available designs. The Lunati Voodoo's predate his time at CCC.

If one really wanted to pursue a cam with these 'Brookshire' lobes call Howards and see if Ben Herheim is still around. Ask about their HYDRAULIC FLAT TAPPET CUSTOM GRIND Part number 419991 For Pontiac application.

However keep in mind the statement made within my link provided previously...

"... be advised, when/if you call Howards cams to order a custom cam with Harold's lobes you have picked out, be certain and sure about what you want, because do NOT expect any of those guys there to have any enthusiasm for, nor deep knowledge of Harold's lobe designs."

That and you are very limited in the selection of these Brookshire lobes. Example if for hyd flat tappet, you will not get the 8 degree split between the intake and exhaust as on the Voodoo 704 cam. Not that it's necessary !

This suggestion is not based on personal experience and is offered for general interest only. As mentioned, I deal with Bullet Racing Cams and use UltraDyne lobes.

Also the issue with the availability of cam cores.


.