That deeper cavity could be a problem. Is that year specific? If the 70-77 models are like that then plate might need a taller support on that side. Unless the post is long enough to reach.
Just went and looked at the images of the later model OEM plate on page two of this thread .. the standoffs are definitely taller on right side of the plate, and the support fins are asymmetrical. Not sure if that's the case with the 70-71 ... maybe that's why the later model plates don't fit the earlier models?
Once again, ELarson will be letting us know if the current version works.
Luckily the posts are very easy to redesign. If it turns out the posts need to be changed I'll need someone to measure the difference in height between the two.
__________________
I'm World's Best Hyperbolist !!
Last edited by dataway; 03-04-2023 at 06:05 PM.
|