If you use a proper thickness Holley spread bore gasket, there is rarely ever any need to
find/use reduced height nuts to go on the studs. The thin paper gaskets are basically worthless.
That slight increase in carb height rarely ever changes any hood clearance dimensions.
I guess I will have to do a Spreadbore Carb thread in the carb knowledge topic.
The carb coloring on the carb looks like a rebuild shop coloring or a poor Holley coloring.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|