I rewired my main feeds as well as headlights using a lot of the info from the Mad Electric website.
Attached is a schematic I created to document my setup. You will note that I used a common junction block, and up-sized most of the feed wires on the charging side with the appropriate sized fusible links.
I also added headlight relays on the rad support with a larger feed.
Sorry if the schematic is a bit hard to read, it was a PDF that I converted to JPG so I could attach it.
__________________
Michael
Oshawa built 1 option Judge basket case. 463, SD KRE 295's, CNC'd factory intake, Cliff's Qjet, Stump Puller HR cam, RARE RA manifolds, Pypes exhaust, T56 Magnum, McLeod RXT clutch, 3.42 12 bolt. 24 year project almost done...
|