Quote:
Originally Posted by 4zpeed
I'm assuming you have the car blocked up and are working underneath.
Next time just pull the entire rear end and do them all at once, much easier.
If you have the shocks mounted, unbolt them both at the bottom.
Edit - If they are close to going through and they are the correct bolts,
they are pointed, most times you can screw them through, good luck.
Frank
|
Yes, up on jackstands. I'll undo the shock absorber bolts to see if I can buy enough CC rotation via the two hydraulic jacks I'm employing to get the holes to align. Holes aren't far off, but not yet good enough to get the bolts started.
Thanks for the ideas so far, PY'ers.