ATI list their diameters at 7.074" OD & 6.325" OD. The small dia offering most likely won't work as the mounting holes would be too close to the OD. The larger would mount OK by the trigger wheel teeth would not extend beyond the OD much. Not sure how it would affect the sensor's pick signal. If the balancer is solid for the first 1" +/- from the OD, drilling & tapping it should be an issue. The sensor hold allows forward and rearward adjustment to compensate for different banacer thicknesses, thus that aspect isn't and issue. Would need to see and or speak with ATI regarding their balancer design.
The distributor / oil drive plug is my design.
|