I used a stock 62 posi I got 2nd hand from Fabcraft and I had to grind the case to clear the ARP bolts sent with the 3.42 I also got from Fabcraft. In fact ... got all my parts from them.
Your pattern looks a hell of a lot better than mine did. Coast side too close to the toe on mine. I fought .... and I mean fought for at least several days .... trying to get the pattern "right". I set up a 12 bolt about 25 years ago in about 4 or 5 hours. Took pics and sent them to Fabcraft that made a few suggestions. I could make the pattern worse but not much better. Fabcraft stopped answering my e-mails so I just said to hell with it and installed it as is. So far it's still together and not making any noise.
Good luck with yours. This is the last time I will ever set up a rearend.
TS
|